Water-Based Acrylic Topcoat
BNW-130
The product has high impact resistance, strong adhesion, excellent acid and alkali resistance, cleaning agent resistance, and excellent wear resistance. Good construction performance, not easy to bubble or sag. It should be used with the bottom and middle surface. It is suitable for weather-resistant coatings for containers, chemical equipment, storage tanks, locomotives or cars.
Product Introduction:
This product is a high-quality water-based flowable paint that can protect and decorate the surfaces of various poly products, containers, crafts, etc.
Product Features:
1. The paint film is tough and durable, without powdering, cracking and other undesirable phenomena.
2. The color is long-lasting and there are a variety of bright colors to choose from.
3. Good mildew resistance and water resistance.
4. No bad odor, easy to clean, just use detergent to clean.
5. The heavy metal content meets the international toy safety standards.
American test standard ASTM F963-96a.
European Common Market EN71 Part 1II2000:
European Directive on the Restriction of Certain Hazardous Substances (RoHS).
Application areas:
Applicable to various indoor and outdoor poly products, cement products, plastic flower pots, handicrafts, containers and hardware surfaces.
Instructions for use:
1. Surface treatment: The surface of the substrate must be completely clean and dry. First use a wire brush to scrape off the loose particles, and then use sandpaper to polish the surface. The plastic surface should first be sprayed with a layer of special primer.
2. Dilution amount: Volume ratio) 10 parts of paint add 2 parts of clean water.
3. Construction method: ordinary spraying.
4. Cleaning agent: clean water.
5. Notes:
(1) Do not use when the temperature is 10℃ or below.
(2) Do not store when the temperature is 0℃ or below.
(3) Store in a cool, dry place.
Basic parameters:
1. Color: 20 standard colors, can be matched with various colors.
2. Gloss: semi-gloss.
3. Drying time: temperature is 25℃, relative humidity is 70%, dry to touch: 30 minutes, hard dry: 24 hours, recoat: minimum 8 hours, maximum: unlimited.
4. Solid volume content: 45%.
5. General dry paint film thickness: 40μm.
6. Consumption: 5 square meters/liter.
7. Flash point: 35℃.
